Power High RPVH120 Power Power Thick Resistors
$7.550-199 Piece/Pieces
$7.1≥200Piece/Pieces
Jenis pembayaran: | L/C,T/T |
Inkoterm: | FOB,CFR,CIF |
Transportasi: | Ocean,Land |
Pelabuhan: | SHANGHAI |
$7.550-199 Piece/Pieces
$7.1≥200Piece/Pieces
Jenis pembayaran: | L/C,T/T |
Inkoterm: | FOB,CFR,CIF |
Transportasi: | Ocean,Land |
Pelabuhan: | SHANGHAI |
Model No: YZPST-RPVH120/1-22K±5%
Merek: Yzpst
Tempat Asal: Cina
Resistance /Ω: 1--1M
Allowable Deviation: ±5%
Temperature Coefficient: ±250ppm/℃(25-85℃)
Maximum Working Voltage: 1500V DC
Insulation Withstand Voltage: 5KV DC 1min
Distributed Capacitance: <45pF
Insulation Resistance: >10GΩ
Range Of Working Temperature: -55℃-+155℃
Menjual unit | : | Piece/Pieces |
Rpvh120 Power Power Plick Film Resistors
Cakupan:
Spesifikasi ini menentukan karakteristik dan persyaratan umum untuk resistor film tebal tipe daya RPVH 120.
Dimensi : Ukuran Nama: Paket Mm Jenis: SOT-227
Struktur resistor :
Standar referensi:
GB/T 5729-2003 Resistor Tetap untuk Peralatan Elektronik Bagian 1: Spesifikasi Umum
GB/T 2828.1-2012 Prosedur Pengambilan Sampel Teknis Inspeksi Batch-Bych-Batch dan Tabel Pengambilan Sampel GB/T 2691-2016 Metode penandaan resistor dan kapasitor
Parameter teknis utama :
Rated power |
When the base plate temperature is ≤70℃, the rated power is 120W |
Resistance /Ω |
1--1M |
Allowable deviation |
±5% |
Temperature Coefficient |
±250ppm/℃(25-85℃) |
Maximum working voltage |
1500V DC |
Insulation withstand voltage |
5KV DC 1min |
Distributed capacitance |
<45pF |
Insulation resistance |
>10GΩ |
Range of working temperature |
-55℃-+155℃ |
Item inspeksi utama, metode inspeksi dan persyaratan kinerja:
project |
Test conditions |
Performance requirement |
Terminal strength |
Soft lead pull: 10N, stud type 1.0N.m torque |
ΔR≤±(1%R+0.05Ω) |
high frequency vibration |
Frequency 10~500Hz, 10g, 6h |
ΔR≤±(1%R+0.05Ω) |
overload |
Apply 1.5 times the rated power voltage for 10s |
ΔR≤±(0.4%R+0.1Ω) |
Room temperature durability |
The rated power load is 1000 h, and the bottom plate temperature is less than 70 ℃ |
ΔR≤±(5%R+0.05Ω) |
Metode dan persyaratan pemasangan radiator
Resistor dipasang pada radiator dengan sekrup 2 M4, dan torsi pemasangan kurang dari atau sama dengan 1,3nm (untuk memastikan penggunaan daya dan disipasi panas yang sangat baik);
Permukaan kontak harus dibersihkan;
Kerataan radiator adalah: 0,05mm-0.1mm (dalam kisaran 100mm); Kekasaran radiator harus 6.3цm;
Untuk meningkatkan konduktivitas termal, permukaan kontak (alumina, heat sink) harus dilapisi dengan minyak silikon.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.